High Power Dual Band Concurrent AP Router (MN-9096)

Model: MN-9096

High Power Dual Band Concurrent AP Router

MN-9096

•Complies with IEEE 802.11a/b/g/n and ac Draft 2.0
•Maximum PHY data rate up to :
  173.3 Mbps using 20MHz bandwidth,
  400Mbps using 40MHz bandwidth,
  866.7Mbps using 80MHz bandwidth.
•2x2 MIMO technology for extended reception robustness and exceptional throughput
•Support IEEE 802.11 e/i/h/k
•5MHz / 10MHz / 20MHz / 40MHz / 80MHz bandwidth transmission
•OFDM with BPSK, QPSK, 16QAM, 64QAM and 256QAM modulation.
•Convolutional Coding Rate: 1/2, 2/3, 3/4, and 5/6
•Support Network Attached Storage
•All Giga RJ45 Ports
•Support USB2.0

Standard
IEEE 802.1 a/b/g/n and ac Drart 2.0
Chipset
Realtek RTL8197D
Frequency Band
2.400GHz ~ 2.484GHz
5180MHz~5240MHz (Band 1)
5745MHz~5825MHz (Band 4)
Media Access Control
CSMA/CA
Data Rate
802.11a/g:54, 48, 36, 24, 18, 12, 9 & 6 Mbps
802.11b:11, 5.5, 2 and 1 Mbps
802.11n:(20MHz):up to 150 Mbps
802.11n:(40MHz):up to 300 Mbps
802.11ac (40MHz):up to 400Mbps
802.11ac (80MHz):up to 866.7Mbps
Security
WEP
WPA
WPA2
Sensitivity
-91dBm @ 802.11a
-94dBm @ 802.11b
-90dBm @ 802.11g
-87dBm @ 802.11n
-52dBm @ 802.11ac
Output Power(Typical)
802.11b : up to 24 ± 1 dBm
802.11g : up to 21 ± 1 dBm
802.11n : up to 20 ± 1 dBm (2.4GHz)
802.11a : up to 19 ± 1 dBm
802.11n : up to 18 ± 1 dBm (5GHz)
802.11ac : up to 15 ± 1 dBm
Antenna
One DualBand 5 dBi antenna
One 2.4GHz 5 dBi antenna
One 5GHz 5 dBi antenna
Power requirement
12V DC (min 1.5A)
Storage Humidity
10% ~ 90% (Non-condensing)
Operation Temperature
0°C ~ 60°C
Connector
Three antenna connectors
One RJ-45 WAN ports
Four RJ-45 LAN ports
Reset to default button
WPS button
USB A-Type connector
Power jack